7-55
7 Tag Data Link Functions
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
7-2 Setting Tag Data Links
7
7-2-12 Saving the Network Configuration File
Yes Button:
The following dialog box is displayed.
Select the
Initialize tag data link configuration, and then emulate cycling power Option and then click
the OK Button.
Precautions for Correct UsePrecautions for Correct Use
The Controller is not restarted. Only the built-in EtherNet/IP port is restarted.
No Button:
The device parameters are not cleared or reset.
You can save device parameters set in the Network Configurator or device parameters uploaded from
the network in a network configuration file.
1
Select File
−
Save As.
The following dialog box is displayed.
Untitled.nvf is displayed as the default file name.
7-2-12 Saving the Network Configuration File
To Next Page
Loading...
