Appendices
A-6
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
To save the EDS file, use the following procedure.
1
Select the target hardware device in the Hardware List, and then select EDS File
−
Save.
A Save EDS File Dialog Box is displayed.
2
Input the folder and file names and click the Save Button.
The EDS file is saved.
To search the devices (EDS files) displayed in the Hardware List, use the following procedure.
1
Select EDS file − Find.
The following dialog box is displayed.
2
Input the character string to search for and click the Find Next Button.
3
When a matching device is found, the cursor moves to that position.
4
To quit the search operation, click the Cancel Button.
Additional Information
• The device is found only if it is located below the present cursor position in the Hardware List.
• To search all the devices, select
Hardware in the Hardware List before you perform the search
procedure.
To display the properties of the EDS file, use the following procedure.
1
Select the desired hardware (device) from the Hardware List.
2
Select EDS File
−
Property.
The following dialog box is displayed.
A-2-4 Saving EDS Files
EDS File − Save
A-2-5 Searching EDS Files
EDS File − Find
A-2-6 Displaying EDS File Properties
EDS File − Property
To Next Page
Loading...
