7-47
7 Tag Data Link Functions
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
7-2 Setting Tag Data Links
7
7-2-8 Uploading Tag Data Link Parameters
Clicking the No Button:
Performing a Batch Upload over the Network
Parameters are uploaded from all devices on the network. The current Network Configuration
Information will be lost.
The following dialog box will be displayed. Select the devices for which to upload parameters
and click the OK Button.
Clicking the Cancel Button:
The upload operation is cancelled. The upload is not performed.
4
If you click the No Button in step 2, the following dialog box is displayed.
Select the devices for which to upload parameters and click the OK Button.
Uploading Individually from Particular Devices
1
Connect the Network Configurator online and select the icon of the EtherNet/IP Unit from which
you want to upload the parameters. To select multiple nodes, press and hold the Shift Key while
you select additional icons. (In the following example, 2 nodes are selected: 192.168.250.1 and
192.168.250.2.)
Right-click the icon to display the pop-up menu, and select
Parameter
−
Upload.
To Next Page
Loading...
