14-41
14 Troubleshooting
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
14-3 Checking Status with the Network Configurator
14
14-3-1 The Network Configurator’s Device Monitor Function
z Status 2 Tab Page
This tab page displays information on nodes with tag data link originator settings based on
_EIP_TargetPLCModeSta (Target PLC Operating Mode) and _EIP_TargetPLCErr (Target PLC Error
Information) in the _EIP_EstbTargetSta (Normal Target Node Information) system-defined variable.
This information is in blue if the connection is normal, or red if an error occurred.
Additional Information
The target Controller status can be used when the Controller status is selected for all the target
sets for both originator and target connections. If it is not selected, it is grayed out on the display.
To Next Page
Loading...
