2-4SectionFixed Displays
104
There is no restriction on the number of graphics that can be registered for one
screen data file: any number can be registered as long as the data file capacity is
not exceeded.
• When a mark is included in a character string that is displayed enlarged with
the smoothing function used, the mark is not subject to smoothing.
• Marks are displayed in 1616 dot font with enlargement, even when the char-
acter string, to which marks are inserted, is 22 or larger scale and are dis-
played in 32 dot font.
The properties of mark displays and their relationship with displayed character
strings are indicated below.
Here, mark display, whereby a single mark is displayed as a fixed display, is ex-
plained. For details on the display of marks when they are included in character
strings, refer to 2-4-2 Text (Fixed Display) (page 98) and 2-9 Character String
Display (page 148).
Properties
General
Position Coordinates of the top left corner of the mark
Code Character code of the mark
FF20 to FFFF
H
Attribute Display mode for the mark (Display attribute and drawing
result, page 105).
Standard/Flash/Inverse Flash
Size Scale at which the mark is displayed (Enlarged display, page
104).
11 (Equal), 12 (High), 21 (Wide), 22, 33, 44,
88
Color
Foreground Display color of the mark (Colors other than black and white
are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White/
Transparent
Background Background color of the mark (Colors other than black and
white are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White/
Transparent
16 dots
Position (top left corner of mark)
Foreground color
Background color
16 dots
Enlarged Display
Marks can be displayed at the following scales.
11 (Equal) 21 (Wide) 12 (High) 2233
4488
Display Functions
To Next Page
Loading...
Need help?
General
