Omron NT21 User Manual

4-3SectionCommands/Responses
391
4-3-17 Character String Input Notify Command (Sent from PT to Host)
Command
Format
1B 53
[ESC] S
t3 d11
53
St1
d12t2
0D
t4
dn1 dn2
s1 s2 [CR]
* * * ** * * * * * * *
* * * * * * * *
t
1
to t
4
: Input character string memory table entry number (4 BCD dig-
its)
0000 to 0499
This is the number of the character string memory table entry
for which there has been character string input.
d1
1
, d1
2
, ..., dn
1
, dn
2
:
Input character string data (1 to 40 characters)
00 to FF
H
In the case of character string memory table entries allocated
words in the host, this is the registered number of words multi-
plied by 2, and the case of character string memory table en-
tries not allocated words in the host, it is data for 40 characters.
s
1
, s
2
: Checksum (2 hexadecimal digits)
This is always added.
Response
None
In accordance with operations at the PT, such as character string settings and
copying of character string memory table entries, notifies the host that a charac-
ter string has been input to the character string memory table entries.
Example
Command
0
1B
53
[ESC] S
31
4F
30
0
53
S2
3230
1
4F
0D4E 30 46
0
F [CR]
4D
52
OM
RON
Input character string memory table entry number: No.210
Input character string data (hexadecimal): OMRON
Checksum (hexadecimal): 0FH
Here, it is ascertained that OMRON has been input to character string memory
table entry 210.
Format
Function

Omron NT21 Specifications

General

Brand	Omron
Model	NT21
Category	Touch terminals
Language	English