Omron NT21 User Manual

2-2SectionAreas for Control/Notification
66
Symbol AllocationCS/CJ-series PCsAllocationCV-series PCsAllocationC-series PCs
T
TC Area,
Timer PVs
No
Timer Area,
Timer PVs
No
TC Area,
Timer PVs
No
TU --- --- --- ---
TC Area,
Timer Completion Flags
No
C
TC Area,
Counter PVs
No
Counter Area,
Counter PVs
No
TC Area,
Counter PVs
No
CU --- --- --- ---
TC Area,
Counter Completion Flags
No
W --- --- --- --- WR Area
Not for
Host Link
TK --- --- --- --- Task Flags No
D DM Area OK DM Area OK DM Area OK
E
EM Area
*2
,
current bank
OK
EM Area,
current bank
Not for
Host Link
EM Area,
current bank
Not for
Host Link
E0_ to
EC_
--- --- --- ---
EM Area,
EM banks 0 to C
Not for
Host Link
*1: LR 00000 to LR 00199 are converted to CIO 01000 to CIO 01199.
*2: The EM Area is supported only by the C200HX/HG/HE (-Z)E PCs.
The Auxiliary Area of the CVM1 and CV-series PCs is allocated to system func-
tions, and it cannot be used for purposes other than system use.
The range of each memory area differs according to the PC. Refer to Appendix D
PC Memory Maps on page 435.
The screen numbers that can be specified are as follows:
BCD Hexadecimal Screen
0000 0000 No display (window closed)
0001 to 3999 0001 to 0F9F Window screen No. 1 to 3,999
The X coordinates that can be specified are as follows:
PT BCD Hexadecimal Contents
NT21
NT31/C
NT631/C
0000 to 0240
0000 to 0300
0000 to 0620
0000 to 00F0
0000 to 012C
0000 to 026C
X coordinate of bottom-left corner
(multiple of 20)
NT21: 0 to 240
NT31/NT31C: 0 to 300
NT631/NT631C: 0 to 620
The Y coordinates that can be specified are as follows:
PT BCD Hexadecimal Contents
NT21
NT31/C
NT631/C
0019 to 0139
0019 to 0239
0019 to 0479
0013 to 008B
0013 to 00EF
0013 to 01DF
Y coordinate of bottom-left corner
(multiple of 20 - 1)
NT21: 19 to 139
NT31/NT31C: 19 to 239
NT631/NT631C: 19 to 479

Omron NT21 Specifications

General

Brand	Omron
Model	NT21
Category	Touch terminals
Language	English