Omron NX-SID800

7 - 25
7 Programming
NX-series Safety Control Unit User’s Manual (Z930)
7-4 Programming Languages
7
7-4-2 FBD Language
 Correct Connection Configurations
Connecting Instructions or User-defined Function Blocks
You can connect a parameter to an instruction or a user-defined function block with a connecting line.
You can connect a pair of instructions or a pair of user-defined function blocks with a connecting line.
You can also connect more than one instruction or user-defined function block to another instruction or
user-defined function block.
Var1 Var2
FB1
FB1
FB1 FB2
FB2
FB3