Omron NX-SID800

Related Manuals
30
NX-series Safety Control Unit User’s Manual (Z930)
Related Manuals
The following manuals are related. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series Safety Con-
trol Unit User’s Man-
ual
Z930 NX-SL
NX-SI
NX-SO 
Learning how to use
NX-series Safety
Control Units.
Describes the hardware, setup methods, and functions of
the NX-series Safety Control Units.
NX-series Safety Con-
trol Unit Instructions
Reference Manual
Z931 NX-SL Learning about the
specifications of
instructions for the
Safety CPU Unit.
Describes the instructions for the Safety CPU Unit.
When programming, use this manual together with the
NX-series Safety Control Unit User’s Manual (Cat. No.
Z930).
NX-series Data Refer-
ence Manual
W525
NX-  Referring to the list of
data required for
NX-series unit sys-
tem configuration.
Provides the list of data required for system configuration
including the power consumption and weight of each
NX-series unit.
Sysmac Studio Ver-
sion 1 Operation Man-
ual
W504 SYSMAC-
SE2
Learning about the
operating procedures
and functions of the
Sysmac Studio.
Describes the operating procedures of the Sysmac Stu-
dio.
NJ/NX-series Trouble-
shooting Manual
W503 NX701-
NJ501-
NJ301-
NJ101-
Learning about the
errors that may be
detected in an
NJ/NX-series Control-
ler.
Concepts on managing errors that may be detected in an
NJ/NX-series Controller and information on individual
errors are described. Use this manual together with the
NJ-series CPU Unit Hardware User’s Manual (Cat. No.
W500) or NX-series CPU Unit Hardware User’s Manual
(Cat. No. W535) and with the NJ/NX-series CPU Unit
Software User’s Manual (Cat. No. W501).
NX-series Ether-
CAT® Coupler Unit
User's Manual
W519 NX-ECC Learning how to use
an NX-series Ether-
CAT Coupler Unit and
EtherCAT Slave Ter-
minals
The following items are described: the overall system and
configuration methods of an EtherCAT Slave Terminal
(which consists of an NX-series EtherCAT Coupler Unit
and NX Units), and information on hardware, setup, and
functions to set up, control, and monitor NX Units through
EtherCAT.
NX-series Ether-
Net/IP
TM
Coupler Unit
User's Manual
W536 NX-EIC Learning how to use
an NX-series Ether-
Net/IP Coupler Unit
and EtherNet/IP Slave
Terminals
The following items are described: the overall system and
configuration methods of an EtherNet/IP Slave Terminal
(which consists of an NX-series EtherNet/IP Coupler Unit
and NX Units), and information on hardware, setup, and
functions to set up, control, and monitor NX Units through
EtherNet/IP.
NX-series System
Units User’s Manual
W523 NX-PD1
NX-PF0
NX-PC0
NX-TBX
Learning how to use
NX-series System
Units
Describes the hardware, setup methods, and functions of
the NX-series System Units.
NJ/NX-series CPU
Unit Software User’s
Manual
W501 NX701-
NJ501-
NJ301-
NJ101-
Learning how to pro-
gram and set up an
NJ/NX-series CPU
Unit. Mainly software
information is pro-
vided.
The following information is provided on an NJ/NX-series
CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 language specifi-
cations
Use this manual together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No. W500) or NX-series
CPU Unit Hardware User's Manual (Cat. No. W535).
NJ/NX-series Instruc-
tions Reference Man-
ual
W502 NX701-
NJ501-
NJ301-
NJ101-
Learning detailed
specifications on the
basic instructions of
an NJ/NX-series CPU
Unit.
The instructions in the instruction set (IEC 61131-3 speci-
fications) are described. When programming, use this
manual together with the NJ-series CPU Unit Hardware
User's Manual (Cat. No. W500) or NX-series CPU Unit
Hardware User’s Manual (Cat. No. W535) and with the
NJ/NX-series CPU Unit Software User's Manual (Cat. No.
W501).