Omron NX-SID800

7 Programming
7 - 68
NX-series Safety Control Unit User’s Manual (Z930)
Item Displayed information Related parameters
Program Memory Displays the memory usage of the
safety program.
• Number of Safety I/O Unit connections
• Number of functions and function blocks in the
safety program
• Numbers of exposed variables, global vari-
ables, and device variables
• Comment sizes for exposed variables, global
variables, and device variables
• Function block names
• Number of device settings in the Safety Slave
Unit parameter settings
• Terminal comments in the parameters for
Safety Slave Units
Project Maintenance
Data
Displays the usage of memory by
the project.
• Program names
• Number of exposed variables
• Comment sizes for exposed variables, global
variables, and device variables
• Number of device settings in the Safety Slave
Unit parameter settings
• Terminal comments in the parameters for
Safety Slave Units
Number of Safety
Master Connections
Displays the number of Safety I/O
Unit connections for the Safety CPU
Unit.
• Number of Safety I/O Unit connections
Input Data Sizes Displays the input data usage by
the Safety CPU Unit.
• Number of Safety I/O Unit connections
• Exposed variable data sizes in input settings
Output Data Sizes Displays the output data usage by
the Safety CPU Unit.
• Number of Safety I/O Unit connections
• Exposed variable data sizes in output settings
Exposed Input Vari-
ables
Displays the number of exposed
variables in the input settings.
• Number of exposed variables in the input set-
tings
Exposed Output Vari-
ables
Displays the number of exposed
variables in the output settings.
• Number of exposed variables in the output set-
tings