Omron NX1P

28
2
2 Before You Begin
This section describes the process of hardware mounting and wiring and the
installation of the Sysmac Studio.
2-1 System Configuration and Devices .............................................................. 2-29
2-1-1 Overview ........................................................................................ 2-29
2-1-2 Wiring ............................................................................................. 2-30
2-2 Installing the Sysmac Studio ........................................................................ 2-32
2-2-1 Installing the Sysmac Studio ......................................................... 2-32
2-2-2 Requirements for Installation ......................................................... 2-32