Omron NX1P User Manual

9
Manual name Cat. No. Model Application Description
NJ/NX-series
Motion Control
Instructions
Reference Manual
W508 NX701-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
NX1P2-□□□□
Learning about the
specifications of the
motion control
instructions.
The motion control instructions are
described. When programming, use this
manual together with the NJ-series CPU
Unit Hardware User's Manual (Cat. No.
W500), NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501),and NJ/NX-series CPU Unit
Motion Control User’s Manual (Cat. No.
W507).
NJ/NX-series
CPU Unit
Built-in
EtherCAT

Port
User’s Manual
W505 NX701-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
NX1P2-□□□□
Using the built-in
EtherCAT port on an
NJ/NX-series CPU
Unit.
Information on the built-in EtherCAT
port is provided. This manual provides
an introduction and information on the
configuration, features, and setup. Use
this manual together with the NJ-series
CPU Unit Hardware User's Manual (Cat.
No. W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
NJ/NX-series
CPU Unit
Built-in
EtherNet/IP Port
User’s Manual
W506 NX701-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
NX1P2-□□□□
Using the built-in
EtherNet/IP port on an
NJ/NX-series CPU
Unit.
Information on the built-in EtherNet/IP
port is provided. Information on the
basic setup, tag data links, and other
features is provided. Use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
NJ/NX-series
Troubleshooting
Manual
W503 NX701-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
NX1P2-□□□□
Learning about the
errors that may be
detected in an
NJ/NX-series
Controller.
Concepts on managing errors that may
be detected in an NJ/NX-series
Controller and information on individual
errors are described. Use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
Sysmac Studio
Version 1
Operation Manual
W504 SYSMAC-SE2 □□□
Learning about the
operating procedures
and functions of the
Sysmac Studio.
The operating procedures of the
Sysmac Studio is described.
NJ/NX-series
Startup Guide for
Motion Control
W514 NX1P2-□□□□
NX701-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
SYSMAC-SE20□□
R88M-1□
R88D-1SN□-ECT
Learning startup
procedures and
Sysmac Studio
operating procedures
for someone that will
use NJ/NX series
motion control
functions for the first
time.
The operations from hardware
assembly through debugging for axis
parameter settings, simple one-axis
positioning, and two-axis linear
interpolation are described.

Omron NX1P Specifications

General

Brand	Omron
Model	NX1P
Category	Controller
Language	English