Omron SYSDRIVE 3G3XV-EV2 Series - Page 26

22
Inverter Model
3G3XV--EV2
A2037A2022A2015A2007A2004A2002A20013-phaseInverter Model
3G3XV--EV2
AB037AB022AB015AB007AB004AB002AB001Single-phase
Operation
di i
Input
il
Operation signal Forward operation/reverse operation by individual command
conditions signals
Reset Releases protection while the function is operating.
Multifunction set-
ting
Possible to set 4 speeds max.
Multifunction input
selection
Multifunction contact input: two of the following signals avail-
able to select.
Multispeed command, jog operation, accel/decel time select,
3 wire sequence, external coasting stop, speed search, exter-
nal fault, External fault.
Output
signals
Operation state
(photo-coupler
output)
Multifunction contact output: two of the following signals avail-
able to select.
During running output, zero speed, frequency agree, output
frequency ≥ setting value, during overtorque detection
Fault contact NO/NC contact output
Built-in function The following set-up is available: frequency reference bias/
gain, upper/lower frequency limit, DC braking stop current at
start, s-curve characteristics, torque boost, frequency meter
calibrating gain, auto reset/restart operation, frequency jump.
Monitor
display
function
Digital Operator Displays setting frequency, output frequency, output current,
rotating direction, and the contents at protective function
operation.
Analog output
monitor
Analog output (0 to 10 VDC). Possible to select output fre-
quency or output current.
Protective configuration Enclosed wall-mounted type NEMA 1
(An open chassis type is also available.)
Cooling method
3-phase Self-cooling Forced cooling
g
Single-phase Self-cooling Forced cooling
Weight in lb
(ik)
3-phase 2.4 (1.1) 4.4 (2) 6.6 (3)
g
(mass in kg)
Single-phase 4.4 (2) 6.6 (3) 11.0 (5)
Environmen-
lC dii
Location Indoor (protected from corrosive gases and dust)
tal Conditions
Ambient temperature +14° to 104°F (–10° to +40°C) (not frozen)
Storage temperature
2
–4° to 140°F (–20° to +60°C)
Humidity 90% RH (without condensation)
Vibration Up to 9.8 m/s
2
(1 g) at less than 20 Hz.
Up to 2 m/s
2
(0.2 g) at 20 to 50 Hz.
Note 1. Use a standard 4-pole motor for maximum applicable motor
output.
2. Temperature during shipping (for short period).
Specifications Section 1-6