Omron Sysdrive RX Series - Page 72

3-23
3-7 Parameter List
3
Operation
Analog input, Others
A005 FV/FI selection
00: Switches between FV/FI via terminal AT
01: Switches between FV/FE via terminal AT
02: Switches between FV/FREQ adjuster via
terminal AT
(Enabled only when 3G3AX-OP01 is
used)
03: Switches between FI/FREQ adjuster via
terminal AT
(Enabled only when 3G3AX-OP01 is
used)
04: Switches between FE/FREQ adjuster via
terminal AT
(Enabled only when 3G3AX-OP01 is
used)
00 No No  4-12
A006 FE selection
00: FE only
01: FV/FI auxiliary frequency reference
(not reversible)
02: FV/FI auxiliary frequency reference
(reversible)
03: FE disabled
03 No No 
4-13
A011 FV start frequency
0.00 to 99.99
100.0 to 400.0
0.00 No Yes Hz
4-14
A012 FV end frequency
0.00 to 99.99
100.0 to 400.0
0.00 No Yes Hz
A013 FV start ratio 0. to FV end ratio 0. No Yes %
A014 FV end ratio FV start ratio to 100. 100. No Yes %
A015 FV start selection
00: External start frequency
(A011 set value)
01: 0 Hz
01 No Yes 
A016 FV, FE, FI sampling
1. to 30.
31. (with 500 ms filter ± 0.1 Hz hysteresis)
31. No Yes  4-16
A017 Not used
Use "00".
* Do not change.
00 No No 
Parameter
No.
Function name Monitor or data range
Default
setting
Changes during
operation
Unit Page
Normal
b031 = 10
* 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001
to C008.