Omron SYSMAC CP2E-E D Series

23
CP2E CPU Unit Software User’s Manual(W614)
Related Manuals
The following manuals are related to the CP2E. Use them together with this manual.
Manual name Cat. No. Model numbers Application Contents
SYSMAC CP Series
CP2E CPU Unit Soft-
ware User’s Manual
(this manual)
W614 CP2E-ED-
CP2E-SD-
CP2E-ND-
To learn the software
specifications of the
CP2E PLCs
Describes the following information for CP2E
PLCs.
• CPU Unit operation
• Internal memory
• Programming
• Settings
• CPU Unit built-in functions
• Interrupts
• High-speed counter inputs
• Pulse outputs
• Serial communications
• Ethernet
• Other functions
Use this manual together with the CP2E CPU Unit Hardware User’s
Manual (Cat. No. W613) and Instructions Reference Manual (Cat. No.
W483).
SYSMAC CP Series
CP2E CPU Unit Hard-
ware User’s Manual
W613 CP2E-ED-
CP2E-SD-
CP2E-ND-
To learn the hard-
ware specifications
of the CP2E PLCs
Describes the following information for CP2E
PLCs.
• Overview and features
• Basic system configuration
• Part names and functions
• Installation and settings
• Troubleshooting
Use this manual together with the CP2E CPU Unit Software User’s
Manual (Cat. No. W614) and Instructions Reference Manual (Cat. No.
W483).
SYSMAC CP Series
CP1E/CP2E CPU Unit
Instructions Reference
Manual
W483 CP1E-ED-
CP1E-ND-
CP1E-NAD-
CP2E-ED-
CP2E-SD-
CP2E-ND-
To learn program-
ming instructions in
detail
Describes each programming instruction in
detail.
When programming, use this manual together
with the CP2E CPU Unit Software User’s Man-
ual (Cat. No. W614).
CS/CJ/CP/NSJ Ser
ies
Communications Com-
mands Reference Man-
ual
W342 CS1G/H-CPUH
CS1G/H-CPU-V1
CS1D-CPUH
CS1D-CPUS
CS1W-SCU-V1
CS1W-SCB-V1
CJ1G/H-CPUH
CJ1G-CPUP
CJ1M-CPU
CJ1G-CPU
CJ1W-SCU-V1
To learn communica-
tions commands for
CS/CJ/CP/NSJ-
series Controllers in
detail
Describes
1) C-mode commands and
2) FINS commands in detail.
Read this manual for details on C-mode and
FINS commands addressed to CPU Units.
Note This manual describes commands addressed to CPU Units. It
does not cover commands addressed to other Units or ports (e.g.,
serial communications ports on CPU Units, communications ports
on Serial Communications Units/Boards, and other Communica-
tions Units).