4
CP2E CPU Unit Software User's Manual(W614)
CP2E CPU Unit Hardware User’s Manual (Cat. No. W613)
Section Contents
Section 1 Overview and Specifica-
tions
This section gives an overview of the CP2E, describes its features, and
provides its specifications.
Section 2 Basic System Configura-
tion and Devices
This section describes the basic system configuration and unit models
of the CP2E.
Section 3 Part Names and Functions This section describes the part names and functions of the CPU Unit,
Expansion I/O Units, and Expansion Units in a CP2E PLC.
Section 4 Programming Device This section describes the features of the CX-Programmer used for pro-
gramming and debugging PLCs, as well as how to connect the PLC with
the Programming Device by USB, Ethernet and serial port.
Section 5 Installation and Wiring This section describes how to install and wire CP2E Units.
Section 6 Troubleshooting This section describes how to troubleshoot problems that may occur
with a CP2E PLC, including the error indications provided by the CP2E
Units.
Section 7 Maintenance and Inspec-
tion
This section describes periodic inspections, the service life of the Bat-
tery, and how to replace the Battery.
Section 8 Using Expansion Units
and Expansion I/O Units
This section describes application methods for Expansion Units.
Appendices The appendices provide information on dimensions, wiring diagrams,
and wiring serial communications, network installation for the CP2E and
comparison between CP1E and CP2E.
CP1E/CP2E CPU Unit Instructions Reference Manual (Cat. No. W483)
Section Contents
Section 1 Summary of Instructions This section provides a summary of instructions used with a
CP1E/CP2E CPU Unit.
Section 2 Instruction This section describes the functions, operands and sample programs of
the instructions that are supported by a CP1E/CP2E CPU Unit.
Section 3 Instruction Execution
Times and Number of Steps
This section provides the execution times for all instructions used with a
CP1E/CP2E CPU Unit.
Section 4 Monitoring and Comput-
ing the Cycle Time
This section describes how to monitor and calculate the cycle time of a
CP1E/CP2E CPU Unit that can be used in the programs.
Appendices The appendices provide a list of instructions by Mnemonic and ASCII
code table for the CP1E/CP2E CPU Unit.
To Next Page
Loading...
Need help?
General
