Time-meters
On the front of the device a counter shows the overall running time. This
information is for service purposes.
On the front of the device another counter shows the summarized
treatment time. This is for controlling of the active time of the device.
Treatment cannot be provided (device is blocked automatically) in
case of any manipulation or damage of the time-meters.
Warning and error messages
The treatment cannot be started when an electrode is not connected, the
device indicates the lack of electrode by continuous sound alarm and “Disc”
text on the display
Note: the electrode must be connected continuously during the self-test
procedure. Do not disconnect the electrode during the self-test, because it will
cause an error of the self-test.
If the electrode cooling system has an error, the device indicates it by “COOL”
text on the display.
To Next Page
Loading...