EasyManua.ls Logo

OncoTherm EHY-2000plus - Servicing;Maintenance; Disposal

OncoTherm EHY-2000plus
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
plus
UM - EHY2000plus-R24
57
Disinfecting the accessories
Electrode: It is very important to disinfect the electrode before each
treatment. Suggested solution is Isopropanol 70% (V/V) Please use it
according to the user instructions on the bottle. Once a week the electrode
has to be cleaned by a soap-solution. Use only damp textile. If the textile is
too wet, the liquid can penetrate into any part of the equipment. Use
medical hygenic paper (see detailed description in Accessories and
Appendix 9 for datasheet) or any other medical hygenic paper with CE
mark - between the bare skin and the electrodes, to fix the electrode. No
other material is allowed to be used!
Treatment bed: Concerning the EHY-bed a cleaning procedure must be
done regularly by the user, according to the normal hospital disinfecting
rules. The mattress of the bed must be cleaned with a disinfecting solution.
Suggested solution is Incidin plus (HenkelEcolab) according to user
instructions on the bottle.
Further recommendations:
Use a special liquid provided by the manufacturer to avoid algae formation
in the electrodes. Please check the instructions in the User manual in the
Treatment part, APPENDIX 3. (Bolus electrode refilling)
This special liquid is added to the water of the waterbed the water of the
waterbed mattress during the installation and on the regular half year
services by the Oncotherm service technicians.
Servicing/Maintenance
The user is required to have the unit serviced once every half year under
normal operating conditions. Only authorized Oncotherm service technicians
can do this work. The user must obtain certification concerning to the nature
and extent of the work with information on any alteration made to the
nominal data or operating range. This certification must also show the date
and the name of the firm and a signature.
Disposal
If it is requested, the manufacturer arranges the disposal of the device. In
case of disposal, the manufacturer is responsible for organizing the
transportation of the unit (with accessories). Price of transportation and
packaging will be given to you by our office.