plus
UM - EHY2000plus-R24
Symbols and their definitions
Please note the symbols below for correct usage of the equipment:
This symbol is intended to inform the user about the ground independent (body
floating) construction. Do not rearrange the professional installation.
This symbol is intended to alert the user to the presence of important operation
and maintenance instructions in the literature accompanying this product.
This symbol warns the user to read the relevant part in the User’s manual.
This symbol informs the user that the device is intended to emit non-ionizing
radiation.
This symbol indicates that the waste of electrical and electronic equipment
must not be disposed as unsorted municipal waste but has to be collected
separately. Please contact the authorized representative of Oncotherm Group
for information concerning the decommissioning of your equipment.
Conductive-enclosed CLASS I EQUIPMENT:
EQUIPMENT having a durable and substantially continuous ENCLOSURE of
conductive material which envelops all conductive parts with the exception of
small parts, such as nameplates, screws and rivets, which are isolated from LIVE
parts by insulation at least equivalent to REINFORCED INSULATION. The
ENCLOSURE of insulation-enclosed CLASS II EQUIPMENT may form a part or the
whole of the SUPPLEMENTARY INSULATION.
To Next Page
Loading...