ONE Technologies
- 118 -
Name Character set Length
Volume Descriptor d-character 32 Bytes
System Identification a-character 32 Bytes
Volume Set d-character 128 Bytes
Publisher a-character 128 Bytes
File Preparer a-character 128 Bytes
Application a-character 128 Bytes
Copyright File d-character, ‘.’, ‘;’ 37 Bytes
Abstract File d-character, ‘.’, ‘;’ 37 Bytes
Bibliographical File d-character, ‘.’, ‘;’ 37 Bytes
• The characters ‘Ä’, ‘Ö’, ‘Ü’, ‘ä’, ‘ö’, ‘ü’ and ‘ß’ are converted to
‘AE’, ‘OE’, ‘UE’, ‘ae’, ‘oe’, ‘ue’ and ‘ss’ in the ISO and ASCII
character sets.
• The dot ‘.’ is eliminated in the ISO character set if it was used in
the folder name. With file names, only the last dot is maintained
in the ISO character set as a separator between the file name
and the file extension.
• Characters which are not allowed from the selected-character set
are replaced by the ‘_’ underline character.
• File and folder names are shortened if they are longer than the
selected maximum length. Abbreviation procedure: the first four
characters are maintained, the next character(s) is/are eliminated
until the length is not more than the allowed maximum. For
example: from the original file name börning_rom.txt, the file
name after conversion to ISO Level 1 is BOER_ROM.TXT.
To Next Page
Loading...