ONE Technologies
- 60 -
9.2 FireWire-Drives
Problem: My computer does not recognize the FireWire drive.
Possible reasons:
- Check for proper connection of the drive.
- Check if the FireWire card is working properly.
- MACINTOSH USER:
o Check if you have installed the drivers provided
on the ONE_ToolsCD properly.
o Check the version of the apple
„FireWireEnabler“ and „FireWireSupport“. These
two system extensions should be installed on
your system in version 2.8.4 (at least 2.7). At
the time when this manual was written version
2.8.4 was the best choice. 2.8.5 (contained in
OS 9.2.2) was not working with most of the
FireWire devices!
- WINDOWS USER:
o Please notice that FireWire is only supported by
Windows 98SE, ME, 2000 and XP!
o Check if the FireWire card or ports are working
properly. Are they shown in the device manager
without any error-signs? Many onboard
controllers (mainly in notebooks) need drivers
which have to be installed before first use!
Normally they are included on a special „Driver
and Utility“-CD (package content of the
notebook or computer)
To Next Page
Loading...