ONE Technologies
- 14 -
seconds the drive is recognized by the system. At this time you can
use the recorder only as CD-ROM drive. For using it as a CD/DVD
recorder you have to install optional CD/DVD recording software.
ONE Technologies CD/R/RW drives are tested with TOAST by
Roxio software (www.roxio.com). Contact your local dealer to obtain
a special priced OEM bundle version!
3.4 Installation on a Windows System
FireWire
For using a FireWire device under Windows you have to use
Windows 98 SE, ME, Windows 2000 (no support for FireWire DVD-
Multirecorders from ONE) or Windows XP.
Windows 95 and NT offer NO support for FireWire at all!
Connect your new ONE drive with the power cord to a suitable
current source (110-260 V) and switch it on. Connect the drive with
the included FireWire cable to a free port on your computer. Now
start the system. Windows will automatically recognize and install
the device. In some cases you will be asked to insert the windows
installation CD, so keep it handy.
USB 2.0
High-speed USB 2.0 is ONLY supported by Windows 98SE, ME, XP
(XP needs Service Pack 1 *) and 2000. All HighFly USB 2.0
devices are downwards compatible. That means that you can use
them also under older systems, but only as USB 1.1 devices with
To Next Page
Loading...