ONE Technologies
- 62 -
Hard disks under Windows:
Problem: Drive cannot be seen under “my computer” or in the
explorer, even if the installation seems to be successful!
Possible reasons:
- Have a look in the device manager and check if the hard
drive is shown there without any error signs
(SCSI/USB/FireWire/IDE).
- Remember that an installed hard drive has to be
configured (partitioning and formatting) before it can be
used via “my computer” or the explorer!
o Under Win95,98,98SE and ME you can use the
tool „FDISK“ (part of Windows!), or use the
„Shining Tool“ provided on the ONE_ToolsCD. It
has a graphical interface and should be easier
to use than FDISK!
o Under Windows 2000, NT or XP you have to
use the “disk management” (to be found in the
Computer Management). Refer to the windows
documentation.
o Quick installation guides for both methods are
provided in the chapter “FDISK & CO”.
9.4 CD-R/RW, DVD-R/RW Recorders
Problem: It is not possible to create CDs/DVDs.
To Next Page
Loading...