ONE Technologies
- 63 -
Possible reasons:
- Check if the drive is properly installed!
o MAC: Drive is shown in the System Profiler.
o PC: Drive is shown in the Device Manager
without error signs.
- Did you already install recording software? Before that
you can use your recorder as a playback device only
(CD-ROM, DVD-ROM). Some operation systems like
OS 9.2/OSX or Windows XP offer integrated recording
tools, but not all drives are supported or compatible to
them! ONE Technologies recommends the use of
NERO Burning ROM (Ahead Software) for PC and
TOAST (Roxio Software) for Macintosh!
- Is your recording software up to date? Many recording
programs are not delivered in the latest version. Please
check the manufacturers’ homepage for free updates of
your recording software. There you will also find lists of
all supported drives. Please try updating the software if
you have problems using it with your new recorder!
Problem:
My USB 2.0 burner can only write at 4x speed!
Possible reason:
USB 2.0 devices can only offer full speed when connected to a USB
2.0 port. If you connect it to a normal USB 1.1 port it can only be
used with USB 1.1 speed! In this case your recorder will only offer
4x speed for creating CDs.
Problem:
Self recorded CDs can not be read. Or: Error while burning.
To Next Page
Loading...