ONE Technologies
- 69 -
12 Appendix A
12.1 Common information about ONE Technologies drives
Operation Conditions
Voltage Supply: 110 to 240 V, 50 to 60 Hz [ONE Pro]
Voltage Supply: 100 to 240 V, 50 to 60 Hz [AluDRIVES]
Operation Temperature: +5 to +45º C
Relative Humidity: 10 to 80%
Please avoid placing your ONE drive in the vicinity of
- Strong heat sources
- Places where dust gathers easily
- Equipment that produces high voltage fluctuations,
static discharges or electromagnetic fields that may
disrupt it
- Magnetic fields
Your device must be connected to a connection that is properly
cabled and earthed..
Be careful not to spill any liquid on the device..
The ventilation openings must not be covered and must be kept
clean.
To Next Page
Loading...