ONE Technologies
- 71 -
AluDRIVES Series external USB 2.0 Interface
ONE RAID Systems external SCSI Interface
ONE RAID Systems external IEEE-1394a Interface
ONE RAID Systems external IEEE-1394b Interface
13 Appendix B
13.1 „FDISK & CO“
As already explained in the chapters above, hard disks have to be
configured after installation to be used correctly. Therefore you have
different possibilities:
If you are using Windows 95,98,98SE or ME, you can use the
program “FDISK” (part of Windows/DOS) or the “Shining Utility”
provided on the ONE_ToolsCD. Both programs are explained in this
appendix.
If you are using Windows 2000, NT or XP, Windows offers you the
“Disk Management” – console for configuring your disk. The Disk
Management Console is also explained later on.
The Shining Utility: