EasyManua.ls Logo

ONKRON G80 - Safe Handling of Gas Lift Arm; Stored Energy Hazard Warning; Spring Arm Tension Release Procedure; Monitor Removal Safety Tip

ONKRON G80
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
English
Deutsche
Français
Italiano
Español
Русский
Stored energy hazard!
Make sure that you read and understand the following
instructions before you start to assemble and use this product.
Failure to do so could result in injury and/or property damage.
WARNING!
WARNING!
DO NOT remove the cable tie from around
the spring arm if you are not holding the two
halves of the spring arm together.
1
1) Firmly hold the two halves of the
spring arm together and have another
person remove the cable tie from
around the spring arm.
2
2) Slowly release the pressure of
the spring arm and allow it to
gradually stretch to its full
extension.
WARNING!
Keep the front arm to its highest before taking off the monitor,
otherwise, it might pop up to hurt your jaw.

Table of Contents

Related product manuals