Onkyo HT-S5400

30
En
Note
*1
These listening modes cannot be selected during USB or iPod playback.
*2
When the input source contains the encoded front high channel, front high speakers output the sound.
*3
If there are no surround back speakers, Dolby Pro Logic II is used.
*4
Surround back speakers are not supported.
*5
Front high speakers are not supported.
*6
For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.
*7
AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better
sound according to the player. In that case, set the output setting on the player side to PCM.
*8
If there are no surround back speakers, DTS is used.
• The listening modes cannot be selected with some source formats.
Dolby Digital In this mode, audio from the input source is output without surround-sound
processing. The speaker configuration (presence of speakers), crossover
frequency, speaker distance, A/V Sync and much of the processing set via
Home menu are enabled. See “Advanced Setup” for more details
(➔ page 34).
D
F
XCN
Dolby Digital Plus
*6
D XCN
F XCN
*2
Dolby TrueHD
D XCN
F XCN
*2
DTS
D XCN
DTS-HD High
Resolution Audio
F XCN
*2
DTS-HD Master
Audio
D XCN
F XCN
*2
DTS Express
D XCN
DSD
*7
DTS 96/24
This mode is for use with DTS 96/24 sources. This is high-resolution DTS
with a 96 kHz sampling rate and 24-bit resolution, providing superior
fidelity. Use it with DVDs that bear the DTS 96/24 logo.
D XCN
DTS-ES Discrete
*8
This mode is for use with DTS-ES Discrete soundtracks, which use a
discrete surround back channel for true 6.1/7.1-channel playback. The seven
totally separate audio channels provide better spatial imaging and 360-
degree sound localization, perfect for sounds that pan across the surround
channels. Use it with DVDs that bear the DTS-ES logo, especially those with
a DTS-ES Discrete soundtrack.
GN
*5
DTS-ES Matrix
*8
This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-
encoded back-channel for 6.1/7.1-channel playback. Use it with DVDs that
bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack.
Neo:6 This mode expands any 2-channel source for up to 7.1-channel playback. It
uses seven full-bandwidth channels of matrix decoding for matrix-encoded
material, providing a very natural and seamless surround sound experience
that fully envelops the listener.
•Neo:6 Cinema
Use this mode with any stereo movie (e.g., TV, DVD, VHS).
•Neo:6 Music
Use this mode with any stereo music source (e.g., CD, radio, cassette, TV,
VHS, DVD).
S XCN
*5
This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel
playback.
DN
*5
Listening Mode Description Input
Source
Speaker
Layout
Dolby D
Dolby D +
Dolby TrueHD
DTS
DTS– HD HR
DTS– HD MSTR
DTS Ex p r e s s
DSD
DTS 9 6 / 24
ES Discrete
ES Ma t r i x
Neo 6:Neo 6:
Neo 6:Neo 6 C i nema:
Neo 6 Music: