Page 25 of 40
Therefore, the users must be aware of the following:
• VG10 is not suitable for most uncoated, coarse cardboard boxes.
• Extra attention must be paid to leakages, e.g. vacuum cup shape and surface
roughness
The air flow capability of a VG10 is shown in the graph below:
INFO
• The easiest way to check if a cardboard box is sufficiently tight
is simply to test it using the VG10.
• A high vacuum percentage setting does not give a higher lifting
capacity on corrugated cardboard. In fact, a lower setting is
recommended, e.g. 20%.
• A low vacuum setting results in less air flow and less friction
below the vacuum cups. This means VG10 filters and vacuum
cups will last longer.
To Next Page
Loading...
