VG10 User Manual 1.1.0
Page 26 of 40
Maintenance and repair
All maintenance and repairs must be performed in compliance with this manual,
including safety instructions.
Only use original spare parts.
Filters
The VG10 is equipped with one filter for each suction cup socket, and one filter for the
exhaust. How often the filters need to be changed depends on the nature of the work
piece and the working environment. The VG10 automatically de-dust the filters every
time a grip is released. However, particles can eventually get stuck and build up inside
the filter, lowering the VG10 performance.
A filter service kit is available, which include both new filters and tools needed.
• Filter service kit, PN 17001
Neither use nor power on the VG10 without filters. Dust, hair and larger particles can
get stuck in pump membranes and valve seats, causing permanent damage to the
VG10.
DANGER
• Identify how often the filters needs service and schedule
maintenance with a fixed period short enough to ensure a firm
grip at all times.
• An overall inspection of the VG10 must be performed regularly
and at least once every 6 months.
• Never power the VG10 without filters or with filters mounted
incorrectly. Failure to comply with this precaution can cause
irreversible failure of pump or valves.
To Next Page
Loading...
