DANGER
• You must read, understand and follow all safety information in
this manual, and the robot manual and all associated
equipment before initiating robot motion. Failure to comply
with safety information could result in death or serious injury.
• Robot applications must be constructed in such way that a loss
of grip, for whatever reason, does not result in any injury to
humans or animals.
• Identify how often the filters needs service and schedule
maintenance with a fixed period short enough to ensure a firm
grip at all times. An overall inspection of the VG10 must be
performed regularly and at least once every 6 months.
• Bolts that are insufficiently secured or repetitive overloads can
cause the product to separate unexpectedly.
• The VG10 must not be used for collaborative applications
where the work item itself represents a hazard. Necessary
measures must be taken to avoid changes in work items which
has not been addressed by the risk assessment.
• The information in this manual does not cover designing,
installing and operating a complete robot application, nor does
it cover other peripheral equipment that can influence the
safety of the complete system. The complete system must be
designed and installed in accordance with the safety
requirements set forth in the standards and regulations of the
country where the robot is installed.
• Any safety information provided in this manual must not be
construed as a warranty, by OnRobot A/S, that the robot
application will not cause injury or damage, even if robot
application complies with all safety instructions.
• OnRobot A/S disclaims any and all liability if the VG10 is
damaged, changed or modified in any way. OnRobot A/S cannot
be held responsible for any damages caused to the VG10, the
robot or any other equipment due to programming errors or
malfunctioning of the VG10.
To Next Page
Loading...
