Page 35 of 40
IEC 61131-2:2007 (E)
EN 61131-2:2007 [2004/108/EC]
Programmable controllers
Part 2: Equipment requirements and tests
24V I/O signals in the VG10 control cable are constructed for reliable communication
with robots and PLC’s conforming to these standards.
IEC 61076-2-104:2014 [8-way, coding A, gold contacts]
EN 61076-2-104:2014 [8-way, coding A, gold contacts]
Connectors for electronic equipment
Part 2-104: Circular connectors – Detail specification for circular connectors with M8
screw- or snap-locking
Both the VG10 connector and the cable conforms to type 8-way, coding A, gold
contacts, which is the highest quality rating defined in this standard. Mating
operations: 100 times.
ISO 13732-1:2006
EN ISO 13732-1:2008 [2006/42/EC]
Ergonomics of the thermal environment – Methods for the assessment of human
responses to contact with surfaces
Part 1: Hot surfaces
The product is designed so that the surface temperature is kept under the
ergonomic limits defined in this standard.
IEC 61000-6-2:2005
IEC 61000-6-4/A1:2010
EN 61000-6-2:2005 [2004/108/EC]
EN 61000-6-4/A1:2011 [2004/108/EC]
Electromagnetic compatibility (EMC)
Part 6-2: Generic standards - Immunity for industrial environments
Part 6-4: Generic standards - Emission standard for industrial environments
The product is evaluated according to these standards.
IEC 60068-2-1:2007
IEC 60068-2-2:2007
IEC 60068-2-27:2008
IEC 60068-2-64:2008
EN 60068-2-1:2007
EN 60068-2-2:2007
EN 60068-2-27:2009
EN 60068-2-64:2008
Environmental testing
Part 2-1: Tests - Test A: Cold
Part 2-2: Tests - Test B: Dry heat
Part 2-27: Tests - Test Ea and guidance: Shock
Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
The product is designed to pass tests defined in these standards.
To Next Page
Loading...
