User Manual
A user must be a member of the LDAP Console Server Group DN group in order to gain access to the
console and user interface. For example, the user must be a member of MyGroup on the Active Server to
gain access to the console server.
Additionally, a user must be a member of the LDAP Administration Group DN in order to gain
administrator access to the console server. For example, the user must be a member of AdminGroup on
the Active Server to receive administration privileges on the console server.
4. Click Apply.
5. Ensure the LDAP service is operational and group names are correct within the Active Directory
NOTE When you are using remote groups with LDAP remote auth, you need to have corresponding local
groups on the console server BUT where the LDAP group names can contain upper case and
space characters the local group name on the console server must be all lower case and the
spaces replaced with underscrores. For example, a remote group on the LDAP server may be My
Ldap Access Group needs a corresponding local group on the console server called
my_ldap_access_group. The local group on the console server must specify what the group
member is granted access to for any group membership to be effective.
To Next Page
Loading...
Need help?
General
