209
NOTE Time Zone can also be set to UTC which replaced Greenwich Mean Time as the World standard for
time in 1986.
Configuring NTP ensures the Opengear appliance clock is kept accurate (once Internet connection has
been established).
1. Select the Enable NTP checkbox in the Network Time Protocol section of the System > Date &
Time page
2. Enter the IP address of the remote NTP Server
3. If your external NTP server requires authentication, you need to specify the NTP Authentication
Key and the Key Index to use when authenticating with the NTP server
4. Click Apply NTP Settings
To Next Page
Loading...
Need help?
General
