User Manual
NOTE Your 3G carrier may have provided you with details for configuring the connection including APN
(Access Point Name), Pin Code (optional PIN code which may be required to unlock the SIM card),
Phone Number (the sequence to dial to establish the connection, defaults to *99***1#), Username /
Password (optional) and Dial string (optional AT commands). In general, you only need to enter
your provider’s APN and leave the other fields blank
3. Enter the carrier’s APN e.g. for AT&T (USA) enter i2gold, for T-Mobile (USA) enter
epc.tmobile.com, for InterNode (Aust) enter internode and for Telstra (Aust) enter telstra.internet
4. If the SIM Card is configured with a PIN Code, unlock the card by entering the PIN Code. If the PIN
Code is entered incorrectly three times, the PUK Code is required to unlock the Card.
You may also need to set Override DNS to use alternate DNS servers from those provided by your carrier.
5. To enable Override DNS, check the Override returned DNS Servers box. Enter the IP of the DNS
servers into the spaces provided.
To Next Page
Loading...
Need help?
General
