Opex 72 - Page 28

28
Model 72 User Manual - OPEX Corporation
3 Place the cursor over an existing operator and press Enter to place the
operator in the list. The new operator will be placed after the selected
operator, and the MODIFY OPERATOR screen appears.
Figure 26: Modify Operator screen
4 Make any modification to the operator’s parameters using the keypad
buttons. Operator parameters include:
- RENAME OPERATOR - change the name of the operator.
- PASSWORD - change the operator’s password.
- OPERATOR GROUP - provides a method to organize operators - currently
not used.
- OPERATOR LANGUAGE - select the language used by the operator.
5 Press Enter to save the changes.
Change Operator
1 On the CHANGE OPERATOR LIST screen (see Figure 23), select CHANGE.
The SELECT OPERATOR screen will appear.
Figure 27: Select Operator screen
2 Use the Arrow keys to choose an operator, and press Enter to select the
operator. The MODIFY OPERATOR screen appears.
MODIFY OPERATOR
JANE
ABCDE
1
DEFAULT
RENAME OPERATOR
PASSWORD
OPERATOR GROUP
OPERATOR LANGUAGE
SELECT OPERATOR
JANE
PAT
SUPERVISOR
NEW