2 Operating the System
2-6 AS-Series Operator Manual August 2010
Getting Started
Power up the system:
If the scanner is not already up and running, turn on the power:
1 Turn on the main power switch (see Figure 1).
2 Press the power button on the UPS. The monitor will turn on and the computer
will begin to boot up.
3 Log in to Windows with your Windows/network user name and password. If your
scanner is not connected to a network, you may not have to log in to Windows
first. Proceed to step 4.
Once the computer has finished booting Windows, it will launch the AS-Series
CertainScan application.
NOTE: If you mistakenly close CertainScan, double-click the icon on the desktop to
start it again (the AS3690i/AS3690t icon is shown below).
Log in to the system:
4 On the vertical menu bar, select the icon for your user account.
NOTE: If you do not have your own user account, ask your AS-Series Adminis-
trator for assistance.
FIGURE 2: Login screen
5 Enter your password via the on-screen keyboard or computer keyboard.
Press OK.
To Next Page
Loading...
