Opex Falcon - Page 39

39
Falcon User Manual - Remittance Processing - OPEX Corporation
OCR Read %
Successful OCR Reads / Items with an OCR area defined, for
the current execution
MICR Read %
Successful MICR Reads / Items with a MICR defined, for the
current execution
OCR MICR
Read %
Successful Optical MICR Reads / Items with a MICR defined,
for the current execution
Combined
MICR %
Successful Combined MICR Reads / Items with a MICR
defined, for the current execution
Run Time
Sum of time during which the track was running for the current
job
Jam Time Sum of time that the jam dialog was shown for the current job
Idle Time
Sum of time during which the track was not running for the
current job
Active Job
Time
Sum of time between entering the runscreen and exiting the
runscreen
Processing
Buffers
Regarding the ImageManager, used to store uncompressed
images as items are processed.
DEBUG Last
ProcLoad To
Ctrl
For Engineering use only
Processing
Power Used
Percentage of estimated processing power used to process
this item. Because there are either two processors or hyper-
threading, the maximum sustainable percentage is 200%.
Image
Processing
Estimated average Image Processing Time, per item, in the
current execution.
Compression
Estimated Compression time, per item, in the current
execution.
Network
Bandwidth
Estimated average network write time, per item, in the current
execution.
Table 3: General Information - infoscreen details (continued)
Parameter Description