Introduction 13
FalconV User Manual - Standard Scanning - OPEX Corporation
code, is scanned last. The boundary tells the system the current set is
complete and the next set will begin.
Page types
The term “page type” is used to specify a collection of criteria that a piece must
meet to be classified as a certain type of item; i.e., length, height, barcode,
mark detect, MICR, etc. The system uses the page type parameters set up by
your System Administrator to classify items that come into the system. When
the scanner processes items in a job, it gathers data (such as length and width)
on each item and compares the item to the page types you have designated for
that job. This is how the system identifies each item scanned into the system.
The system then collects the appropriate data from the item and sorts it
according to the current job parameters.
FalconV Specifications
Table 1: FalconV Specifications
Document Feeding
High-capacity auto feed
Continuous drop-feed
Packet feed
Rescan feed
Document Specifications
Width: 2.0” to 12.23” (5.08 cm – 31.06 cm)
Length: 3.5” to 18.25” (8.89 cm – 46.36 cm)
if running Win 7 32-bit OS;
3.5” to 25.50” (8.89 cm – 64.77 cm)
if running Win 7 or Win 10 64-bit OS.
Scanning Speed Up to 110 ppm / 220 ipm @ 300 dpi
In-line Recognition OCR, OMR, barcodes, document type ID
Media Detection
Multifeed detection, height, length, skew and
envelope detection
Document Separation
5 programmable output sort bins
1 programmable straight-path sort bin for extra
thick and delicate items
To Next Page
Loading...
