Operation 21
FalconV User Manual - Standard Scanning - OPEX Corporation
Getting Started
Power up the system:
If the FalconV system is not already up and running, turn on the power:
1 Press the power button on the UPS. The monitor will turn on and the
computer will begin to boot up.
2 Turn on the main power switch (see Figure 2 for location).
3 Log in to Windows with your Windows/network user name and password. If
your FalconV is not connected to a network, you may not have to log in to
Windows first. Proceed to step 4. Once the computer has finished booting
Windows, it will launch the FalconV CertainScan application.
Note: If you mistakenly close CertainScan, double-click the icon on the
desktop to start it again.
Log in to the system:
4 On the main window, select the icon for your user account.
Note: If you do not have your own user account, ask your FalconV Adminis-
trator for assistance.
To Next Page
Loading...
