Operation 71
FalconV User Manual - Standard Scanning - OPEX Corporation
Alternate
DPI mode
This button allows you to switch to an alternate
image output resolution. Intended for use with
scanning individual documents requiring 600 DPI
resolution at 7 ips. Once you click the 600 DPI
button, the machine slows to 7ips automatically
and stays at that speed until deselected. The button works like
a toggle: selecting it enables the alternate DPI mode. Once
finished with the alternate mode, you must deselect it to revert
back to the normal DPI mode.
Defaults
Return to the default capture parameters.
Table 6: Adjust Capture Parameters screen buttons (continued)
To Next Page
Loading...
