Opticon OPR 3001 - USB-HID and USB-VCP Interface Specifications; Settings; Interface Circuit; DOS;V Wedge Interface Specification

Opticon
OPR 3001
Specifications Manual
24
8.2. USB-HID and USB-VCP Interface Specifications
8.2.1. Settings
Reading the menu barcodes in section 10.1 can set the USB interface default.
The interface is full-speed USB (12 Mbps).
8.2.2.
Interface Circuit
Figure 18: USB interface circuit
Do not operate the keyboard while the scanner is transmitting the data to the host;
it may cause data transactions to fail.
8.3. DOS/V Wedge Interface Specification
Reading the menu barcodes in section 10.1 can set the DOS/V Wedge interface default.
Do not operate the keyboard while the scanner is transmitting the data to the host; it may
cause data transactions to fail.