Opticon OPR 3001 - Default Settings 2: Read Options, Trigger, Buzzer

Opticon
OPR 3001
Specifications Manual
31
10.3. Default Settings 2: Read Options, Trigger, Buzzer
Item Default Setting
Setting the number of characters Fixed length OFF all codes
Read mode Multiple read
Multiple read reset time 500 ms
Add-on wait mode 500 ms
Multiple label read Disable
Multiple column read Disable
Redundancy Read 1 times, redundancy = 0
Trigger switch Enable
Trigger repeat Disable
Auto trigger Disable
Read time 2 seconds (when trigger enabled)
Margin check Normal
Buzzer duration 50 ms
Buzzer tone Single tone (3 kHz)
Buzzer loudness Maximum
Buzzer timing Before transmission
Startup buzzer Enable
Good read LED Indicator duration 200 ms