Opticon OPR 3001 - 9 Cable and Connector; RS-232 C Cable; Pin Assignment; Figure 19: RS-232 C Cable

Opticon
OPR 3001
Specifications Manual
25
9. Cable and Connector
9.1. RS-232C Cable
(Standard specification)
Figure 19: RS-232C cable
Type: Straight
Diameter: Φ4.8 ±0.5 mm
Length: 1500 ±50 , -0 mm
Cores: 8 insulated wires, 1 conductive wire
Weight: Approximately 80 g
9.1.1. Pin Assignment
Pin No Signal Name Notes
1 NC Open (not assigned)
2 TXD
3 RXD
4 — Pin no. 6 and jumper
5 GND
6 — Pin no. 4 and jumper
7 CTS
8 RTS
9 NC Open (not assigned)
Connector: A connector with a plug for external power supply (D-sub, 9-pin,
female)
Power Supply: φ4.0 (inside diameter: φ1.7)
Exterior electrode of the plug is GND and interior electrode is +.