Opticon OPR 3001 - Pin Assignment; Connector Specification (Scanner Side)

Opticon
OPR 3001
Specifications Manual
27
Type: Y cable
Diameter: Φ4.8 ±0.5 mm
Length: 1500 ±50 , -0 mm
Cores: 8 insulated wires, 1 conductive wire
Weight: Approximately 80 g
9.3.1. Pin Assignment
DOS/V Host Side DOS/V Keyboard Side
Pin No Signal Name Pin No Signal Name
1 CPU_DATA 1 KEY_DATA
2 — 2 —
3 GND 3 GND
4 VCC 4 VCC
5 CPU_CLK 5 KEY_CLK
6 — 6 —
9.4. Connector Specification (Scanner Side)
CN801 (13-pin)
Signal Name
Pin Number
RS-232C USB Wedge
1 NC VCC VCC
2 R×D NC NC
3 T×D NC NC
4 NC NC CPU_CLK
5 NC NC CPU_DATA
6 GND GND GND
7 NC USB+ NC
8 NC USB- NC
9 NC NC KB_DATA
10 NC NC KB_CLK
11 CTS NC NC
12 RTS NC NC
13 VCC NC NC