Opticon OPR 3001 - 10 Default Settings; Set Default Interface

Opticon
OPR 3001
Specifications Manual
28
10. Default Settings
10.1. Set Default Interface
Scan the following menu barcodes to return to the default settings.
RS-232C
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
RS-232C
_U2_
U2
Single tone
buzzer: 3 kHz*
_W1_
W1
Buzzer duration:
50 ms*
_W7_
W7
Read mode
options: Single
read*
_S0_
S0
END
_ZZ_
ZZ
* If you are using software version TS01Y04 or later, it is not necessary to configure the
foregoing settings.
USB-HID Default
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
USB default
_SU_
SU
END
_ZZ_
ZZ
USB-VCP
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
USB-VCP
_C0_
C01
END
_ZZ_
ZZ