5. Teletext language: set the language of Teletext.
6. Digital Audio: If a channel has AC3 and PCM audio language at the same time,
when you select RAW it will set AC3 audio language as default output and when
you select PCM it will set PCM audio language as default output.
7. SCART output: you can choose between different SCART video signal output:
CVBS and RGB
8. Auto Channel Selection: If you set ON, in the channel list will play automatically
when you highlight the channel. If you set OFF, in the channel list when you
highlight the channel, you should press the OK button to play it.
9. Auto Exit CH List: If you set ON, the channel list will disappear when you press
OK on a Highlighted channel. If you set OFF, the channel list will disappear when
you press OK on a playing channel.
Note: move the coursor down to see another part of menu.
10. Recall List: You can turn Recall
List on or off. If you set ON, when you
press Recall button of RCU you can
get the recall list of all programs
recently watched. If you set OFF,
when you press recall button you can
go back to the last program you have
selected.
11. Low Power Standby: If you set ON, when standby the power consumption is
low when standby. If you set OFF, when standby the power consumption is same
as power on.
To Next Page
Loading...
