Opticum HD X406p - Audio and Remote Control Problems; Network Connectivity Troubleshooting

53
14.3 Technical Specification
Tuner & Channel
Frequency Range
950 MHz to 2150 MHz
Signal Level
-25 to -65 dBm
LNB Power
13V/18V/14V/19V OFF, Imax = 400mA
LNB Tone Switch
22KHz+/-2KHz, 0.6Vpp+/-0.2V
DiSEqC Control
Version DiSEq C 1.0/1.1/1.2/1.3(USALS)Compatible, Tone burst A/B
MPEG
Transport Stream
MPEG-2 ISO/IEC 13818Transport stream specification
Profile Level
MPEG1,MPEG-2 MP@ML,H.264,
Input Rate
80 Mbps for MPEG Transport Stream and 25 Mbps for DV streams
Aspect Ratio
4:3, 16:9
Video Resolution
576i, 576p, 480i, 480p, 720p50, 720p60, 1080i.
Audio Decoding
MPEG-2 layer I and II (Music cam),MPEG4 AAC and MPEG4 AAC-HE (AAC+),Dolby
Digital (AC-3) with bit rates up to 640 K bits /s, LPCM up to 48 KHz,
Audio Mode
Single channel/Dual channel/Joint stereo/Stereo
Sampling
32, 44.1 and 48 KHz
Power Supply
Input Voltage
AC 100 ~240V, 50/60Hz
Power Consumption
StandBy mode <1W, Operation mode 15W, Max load 25W
Protection
Separate internal fuse. Input shall have lightening Protection
Physical Specification
Weight (Net)
About 2.5kg
Operating Temp
0℃ to + 40℃
Storage Temp
-40℃ to + 65℃
Weight and dimensions are not absolutely exact values. In order to improve the product, specifications are subject to change (by
manufacturer) without notice.