12. Front panel Light: Allows to adjust setting of 4-digit LED display on front
panel. There are 5 brightness levels available.
6.2 OSD Setup
Menu->SETTINGS->OSD Setup
1. Menu Transparency: Set the transparency of all menus.
2. TXT Transparency: Set the transparency of teletext.
3. Display Mode: Set the HD screen resolution format between 1080p,
1080i, 720p, 576i or 576p. You can also change this setting by pressing
DISPLAY button on remote, while watching TV.
4. TV Type: Set the TV Type on PAL/NTSC/Auto state.
5. Screen Mode: Set the display format according to the screen ratio. Select
TV screen mode either 4:3 or 16:9 according to the TV type, or press the
MODE button of RCU directly.
6. OSD Timeout: Set the time of disappearing OSD items, for example when
switching channels.
6.3 Parental control
Menu->SETTINGS->Parental Control
1. Password Lock: General enabling/disabling of all receivers locks
2. Installation Lock: By choosing YES, you can set password for entering to
main menu functions.
3. Edit Channel Lock: By choosing YES, you can enable locking channels in
channel edit menu.
4. Age Rating: allow to set protection level. Warning! This function depends on
information from signal, in case no information function will not work!
To Next Page
Loading...
