It will record or play the program automatically according to the timer event settings.
1. To add timer press Menu->TIMES-> Event Timer->(RED) Add, or in EPG menu
press RED button or during watching press TIME button directly.
2. Press the RED button to setup a timer, and press the OK button to save the timer
after setup.
Channel: Select the Channel from Channel List.
Date: Input start date of the timer.
Start/Stop: Set Start time and Stop time of the timer.
Repeat:
<1X> only one time.
<Day> Repeat every day.
<1 Week> Repeat the channel once a week.
<1-5> Repeat the channel from Monday to Friday.
<6-7> Repeat the channel from Saturday to Sunday.
Standby when Stop
If set YES, the receiver will go to standby mode after the timer, if set NO it won’t be
standby.
Record:
If set YES, only if there is a USB device, it will be recorded automatically when the
timer is started. And the recorded PVR will be saved in USB device. If set NO,
event will not be recorded, just receiver will switch to set channel.
3. In Event Timer menu, highlight one event, press the YELLOW button will cancel
this timer and press the GREEN button can go to edit this timer.
7.3 Sleep Timer
To Next Page
Loading...
